Winxcom Program For Calculating X-ray Attenuation Coefficients

AbstractTheoretical calculations of mass attenuation coefficients, partial interactions, atomic cross-section, and effective atomic numbers of PbO-based silicate, borate, and phosphate glass systems have been investigated at 662 keV. PbO-based silicate glass has been found with the highest total mass attenuation coefficient and then phosphate and borate glasses, respectively. Compton scattering has been the dominate interaction contributed to the different total attenuation coefficients in each of the glass matrices. The silicate and phosphate glass systems are more appropriate choices as lead-based radiation shielding glass than the borate glass system. Moreover, comparison of results has shown that the glasses possess better shielding properties than standard shielding concretes, suggesting a smaller size requirement in addition to transparency in the visible region.

IntroductionThe interaction of high-energy photons with matter is important in radiation medicine and biology, nuclear engineering, and space technology. Glass has double functions of being transparent to visible light and absorbing gamma rays and neutrons, thus, providing a radiation shielding for observers or experimenters.

It may also be mentioned that verifications are an interesting option for long-term storage of radioactive waste products.Nowadays, the existing dense silicate flints and their radiation-resistant analogs are characterized by an insufficiently high radiation-optical resistance, a yellowness as a result of a low transmission in the blue and near-UV spectral ranges, high melting temperatures, and a low optical homogeneity due to the corrosive interaction of melts with refractory used for fabricating crucibles and other units of production accessories of a melting facility. This limits the possibility of using radiation-resistant silicate flints for manufacturing radiation-shielding viewing windows for so-called “hot” chambers, medical or industrial radiation facilities, and nuclear and chemical reconnaissance vehicles. Although the existing dense silicate flints have long been manufactured on a commercial scale, it was necessary to design the composition of a new glass that should be transparent over a wider spectral range and have radiation-optical resistance and radiation-shielding properties, at least, no worse than similar characteristics of the existing silicate flints.During the last two decades, borate and phosphate glasses have been investigated extensively, yet there is still a great interest in developing new glasses suited for the demands of both industry and technology. Borate glasses have the promising application for the metal-ceramic seals for their lowing melting temperature and high thermal expansion coefficient matching with that of metals. In such applications, it is found that the glass does not bond directly to the metal but to an oxide that is conventionally formed by a thermal treatment on the metal prior to bonding. The resulting oxide acts as a bonding agent in that it is bonded to the underlying metal and the glass material.

In this study, the mass attenuation coefficients of some potassium compounds (KH 2 PO 4, KNO 3, K 2 S 2 O 8, KOH, K 2 HPO 4, K 2 SO 4, KCl, KIO 3, and KI) have been measured by using Energy Dispersive X-ray Fluorescence Spectrometer (EDXRFS) and a high-resolution Si(Li) detector. Obtained experimental mass attenuation coefficients have been compared with WinXCom and FFAST theoretical values. NXcom computer program has been constructed to calculate both removal and attenuation coefficients for fast neutrons and γ-rays, respectively. The program was coded in FORTRAN77. It can be thought of as an upgrade for the MERCSF-N program which, only, calculates the fast neutrons removal coefficients.

In any case, phosphate glasses have low glass transition temperatures, low optical dispersions, and relatively high thermal expansion coefficients ,. Furthermore, the poor chemical durability, high hygroscopic, and volatile nature of phosphate glasses prevented them from replacing the conventional glasses in a wide range of technological applications. These properties make them useful candidates for fast ion conducting material, biomedical application, and biocompatible materials, such as bone regeneration application and shielding materials. However, the reports of phosphate glass in radiation shielding glass are very limited. Arbuzov and Fyodorov studied optical, spectral, and radiation shielding properties of high lead phosphate glasses.Good reviews on radiation shielding glass development have been published recently by several authors for several glass matrices, silicate glass , borate glass –, and phosphate glass ,. In this work, we have calculated the mass attenuation coefficients, the partial interaction, and the effective atomic numbers of silicate, borate, and phosphate glass containing PbO at 662 keV, using WinXCom software.

The comparisons of radiation shielding properties between glass matrices are also discussed. The glass formulas in this study are PbO: ( )SiO 2, PbO: ( )B 2O 3, and PbO: ( )P 2O 5, where is varied from 30 to 70% by weight.2. Theory and MethodIn this section, we summarize theoretical relations used in the present work.

The total probability for interaction, called the total linear ( ) attenuation coefficient, is equal to the sum of the partial probabilities :where, and are the probability for photoelectric absorption, Compton scattering, and pair production, respectively, and can be derived from the following formula :in which is a constant coefficient, independent of. Parameters and are constants with values between 3 and 5 depending on gamma energy. Is atomic density and is atomic number.

Although the coherent scattering can appear, but it has very tiny influence at high energy. Theoretical values of the mass attenuation coefficients ( ) of mixture or compound have been calculated by WinXCom, based on the mixture rule. Thuswhere is the mass attenuation coefficient for the individual element in each component and is the fractional weight of the element in each component. This mixture is valid when the effects of molecular binding and chemical and crystalline environments are negligible. Theoretical values for the mass attenuation coefficient can be found in the tabulation by Hubbell and Seltzer.

A lot of manual work can be saved by using suitable software. Berger and Hubbell developed XCOM for calculating mass attenuation coefficients or photon interaction cross-sections for any element, compound, or mixture at energy from 1 KeV to 100 GeV. Recently, XCOM was transformed to the Windows platform by Gerward et al. , called WinXCom.WinXCom can generate cross-section or attenuation coefficients of element, mixture, and compound on a standard energy grid, spaced approximately logarithmically, on a grid specified by the user, or for a mix of both grids.

The program provides total cross-sections and attenuation coefficients as well as partial cross-section for incoherent and coherent scattering, photoelectric absorption, and pair production. For compound, the quantities calculated are partial and total mass attenuation coefficients. Total attenuation coefficients without the contribution from coherent scattering are also given, since they are often used in gamma-rays transport calculation. Results and DiscussionThe total mass attenuation coefficients of the three PbO containing glass systems are shown in Table. From the table, the total mass attenuation coefficients of PbO-based silicate glass are higher than in phosphate and borate glasses, respectively, showing that photons are more attenuated in silicate glass than the other two glasses. It was found that the total mass attenuation coefficients were increased with increasing PbO concentration in all glass systems as shown in Table. This is due to increasing of interactions via photoelectric absorption in glass samples.

The increasing rate and values of photoelectric absorption in all glass systems are comparable and proportional with PbO content. Partial interaction of PbO containing silicate, borate, and phosphate glass systems at 662 keV.The variation of Compton scattering with PbO concentration in all glass systems is shown in Figure; the Compton scattering decreases with increasing PbO concentration. The decreasing rates of Compton interaction in all glass systems are comparable. The Compton scattering in silicate glass shows the highest in value and then phosphate and borate glass, respectively, reflecting that photons are better scattered in silicate glass at this energy. Moreover, Table shows that in all the glass systems, Compton scattering is a dominate interaction process in this work. These results are explained with total mass attenuation values.

While the coherent scattering has only weak effect on the total mass attenuation coefficients for all glass systems, the pair production interaction does not occur because the energy is lower than 1.02 MeV. This work has been in good agreement with experimental works by Kirdsiri et al. , Singh et al.

, and Singh et al. in the case of lead borate, bismuth borate, and lead silicate glass systems, respectively. All of partial interaction data are shown in Table along with their PbO concentrations.

The Compton scattering interaction of PbO containing silicate, borate, and phosphate glass systems at 662 keV. Cross-Sections and Effective Atomic NumbersIn this section, the total atomic cross-section, can be expressed aswhere is the fractional abundance of element with respect to number of atoms, is the atomic weight of element, and is the Avogadro constant. Similarly to the total electronic cross-section, is expressed by the following formula:The total atomic and electronic cross-sections are related to the effective atomic number, through the following relation:The atomic cross-section and the effective atomic number of the glasses are shown in Table. The results show that the effective atomic numbers were increased with increasing of PbO concentration in all glass systems. It is due to the increasing of photoelectric absorption; as with theoretical approach, the photoelectric absorption depends on atomic number while on the other hand the Compton scattering tends to depend on density. The effective atomic numbers of borate glass are lower than silicate and phosphate glass, respectively; as shown in Figure, this is due to lower atomic cross-section as shown in Table.

The results are supported by experimental data from Kirdsiri et al. Figure shows the comparison of mass attenuation coefficients between the glass systems and two concrete systems (ordinary concrete and barite concrete). It has been observed that all glass systems can obtain better shielding properties than the two concretes for all PbO concentrations, reflecting that the PbO containing glasses can be very useful as radiation shielding materials. The mass attenuation coefficients of PbO containing silicate, borate, and phosphate glass systems at 662 keV in comparison with two shielding concretes.Furthermore, the results suggested that silicate and phosphate glass systems are more appropriate than borate glass system as lead-based radiation shielding glass. ConclusionIn this work, the mass attenuation coefficients, partial interactions, atomic cross-section, and the effective atomic numbers of silicate, borate, and phosphate glass systems containing PbO have been investigated.

It has been found that silicate and phosphate glass systems are more appropriate than borate glass system in the case of lead-based radiation shielding glass. However, each glass system may be used depending on the intended application and experimental rechecks which are vital. Our results showed that the glasses are potential candidates for gamma-rays shielding materials. They exhibited with better values of shielding properties in comparison with some standard shielding concretes. This suggested a smaller size requirement in addition to transparency in the visible region.Further investigations on the photon absorption in the glass materials are in progress, especially on other theoretical treatments such as X-ray form factor, attenuation, and scattering table (FFAST) to establish uncertainties estimation for better reliability of the results.

Conflict of InterestsThe author declares that there is no conflict of interests regarding the publication of this paper. AcknowledgmentThe author would like to thank Nakhon Pathom Rajabhat University (NPRU) for partially supporting this paper. References. S. Hanagodimath, and L. Gerward, “Photon interaction and energy absorption in glass: a transparent gamma ray shield,” Journal of Nuclear Materials, vol.

465–472, 2009. View at:. V.

Orlov, and Y. Fedorov, “Optical, spectral, and radiation-shielding properties of high-lead phosphate glasses,” Glass Physics and Chemistry, vol. 583–590, 2005.

View at:. D. Xiong, and W. Zhou, “Electronic structure and physical properties of hcp Ti 3Al type alloys,” Transactions of Nonferrous Metals Society of China, vol. 766–771, 2007. View at:. G.

Reddy, and N. Veeraiah, “The structural investigations of PbO-P 2O 5-Sb 2O 3 glasses with MoO 3 as additive by means of dielectric, spectroscopic and magnetic studies,” Physica B, vol. View at:. H. El-Egili, and I. Abbas, “Infrared spectra of Fe 2O 3-PbO-P 2O 5 glasses,” Vibrational Spectroscopy, vol.

View at:. L. Burling, Novel phosphate glasses for bone.

Regeneration applications Ph.D. Thesis, University of Nottingham, 2005. Arbuzov and Y. Fyodorov, “Spectral, radiation-optical and shielding properties of phosphate glasses with high lead content,” Advanced Materials Research, vol. 213–218, 2008. View at:. K.

Kaundal, and K. Singh, “Gamma-ray shielding and structural properties of PbO-SiO 2 glasses,” Nuclear Instruments and Methods in Physics Research B, vol. 944–948, 2008.

View at:. N. Singh, and H.

Singh, “Gamma-ray attenuation studies of PbO-BaO-B 2O 3 glass system,” Radiation Measurements, vol. View at:.

N. Singh, and H.

Singh, “Comparative study of lead borate and bismuth lead borate glass systems as gamma-radiation shielding materials,” Nuclear Instruments and Methods in Physics Research B, vol. 305–309, 2004. View at:. K. Sharma et al., “Gamma-ray attenuation coefficients in bismuth borate glasses,” Nuclear Instruments and Methods in Physics Research B, vol. View at:.

M. Jalali and A. Mohammadi, “Gamma ray attenuation coefficient measurement for neutron-absorbent materials,” Radiation Physics and Chemistry, vol. 523–527, 2008. View at:. D.

Jackson and D. Hawkes, “X-ray attenuation coefficients of elements and mixtures,” Physics Reports, vol. 169–233, 1981.

All retail software uses a serial number or key of some form. The installation often requires the user to enter a valid serial number to proceed. A serial can also be referred to as a 'CD Key'. When you search for Big Fish Games Galapago Serial for example, you may find the word 'serial' amongst the results. Many downloads like Galapago Oberon may also include a serial number, cd key or keygen. If this is the case it is usually included in the full crack download archive itself. Otherwise you can try the serial site linked below. To view any screenshot of game Galapago click any image upper to enlarge it. Match and collect beautiful island creatures, then watch as they turn to gold! This unforgettable journey will take you from beach to jungle to volcano. But you have to reach the top before the volcano erupts to win the ultimate treasure. Serial number game galapago.

View at:. L.

Bjorn Jensen, and H. Levring, “X-ray absorption in matter. Reengineering XCOM,” Radiation Physics and Chemistry, vol.

View at:. L. Jensen, and H.

Levring, “WinXCom—a program for calculating X-ray attenuation coefficients,” Radiation Physics and Chemistry, vol. 653–654, 2004. View at:.

K. Kaewkhaob, A. Pokaipisitc, W. Chewpraditkula, and P. Limsuwana, “Gamma-rays shielding properties of xPbO:(100 − x)B 2O 3 glasses system at 662 keV,” Annals of Nuclear Energy, vol. 1360–1365, 2009. View at:.

N. Tsoulfaniidis, Measurement and Detection of Radiation, pp.

144–147, Hemisphere Publishing, Washington, DC, USA; McGraw-Hill, New York, NY, USA, 1983. Chantler, “Theoretical form factor, attenuation, and scattering tabulation for Z = 1 - 92 from E = 1 - 10 eV to E = 0.4 - 1.0 MeV,” Journal of Physical and Chemical Reference Data, vol. View at:. C.

Chantler, “Detailed tabulation of atomic form factors, photoelectric absorption and scattering cross section, and mass attenuation coefficients in the vicinity of absorption edges in the soft X-ray ( Z = 30 - 36, Z = 60 - 89, E = 0.1 - 10 keV)—addressing convergence issues of earlier work,” Journal of Physical and Chemical Reference Data, vol.

Abstract

Keywords

References

Zamyatin, I.V. Burkov, K.A., 2012. Determination of solutions density by the dilatometric titration method. Russian Journal of General Chemistry, 82(4), pp.639-642.

Terwilliger, T. C., 2002. Automated structure solution, density modification and model building. Acta Cryst. D58, 1937-1940, pp.3519-3540.

Soppe, W. J, 1993. Computer simulation of radiation damage in NaCl using a kinetic rate reaction model. Journal of Physics: Condensed Matter, 5 (22), pp.3519.

Marzouguia, K., Hamzaoui, A.H., Farah, K. and Ben Nessib, N., 2008. Electrical conductivity study of gamma-irradiated table sugar for high-dose dosimetry. Radiation Measurements, 43, pp. 1254–1257.

Hamzaoui, A.H., Farah, K., Marzougui, K., Horchani, S. , Ben Nessib, N. and M’Nif, A., 2009. PH-Metric study of gamma-irradiated table sugar for dosimetry purpose. Radiation Measurements, 44, pp.374–377.

Mitkar, S.R. and Dongarge, S.M., 2012a. Measurement of Linear and Mass Attenuation Coefficient of Alcohol Soluble Compound for Gamma Rays at Energy 0.511 MeV‖. Archives of Applied Science Research, 4(4), pp.1748-1752.

Mitkar, S.R. and Dongarge, S.M., 2012b. Study the Linear and Mass Attenuation Coefficient of Alcohol Soluble Compound for Gamma Rays at Energy 662 KeV. J. Chem. Pharm. Res., 4(8), pp.3944-3949.

Baldha, G.J., Raval, D.A., Subbarao, M.V., and Kulkarni, R. G., 1997. Attenuation Coefficient of Various Gamma Radiations by Solutions of Cobalt Sufate. Applied Radiation and Isotopes, 48(8), pp.1121–1124.

Teli, M.T.e and Chaudhari, L.M., 1995. 'Attenuation Coefficient of 123 KeV Gamma-Radiation by Dilute- Solution of Ferrous Sulfate'. Indian Journal of Pure & Applied Physics, 33(7), pp.395-397.

Chaudhari, L. M. and Teli, M.T., 1996. Linear Attenuation (or Absorption) Coefficient of Gamma Radiation For dilute-Solutions of Potassium-Chloride. Applied radiation and isotopes, 47(3), pp. 365-367.

Teli, M.T.e and Chaudhari, L.M., 1996. The Attenuation Coefficient of Ammonium-Chloride for 662 KeV Gamma-Radiation, Measured for Dilute –solutions‖. Radiation physics and chemistry, 47(4), pp. 531-534.

Today25.2 GB00unknownToday41.7 GB00unknownToday9.9 GB00unknownToday64.1 GB00unknownToday180.2 MB00unknownToday349.3 MB00unknownToday347.3 MB00unknownToday347.1 MB00unknownToday347.3 MB00unknown25 Mar173.5 MB00unknown25 Mar347.1 MB00unknown12 Mar347 MB00unknown12 Mar173.5 MB00unknown10 Feb5 GB00unknownToday7.4 GB00unknownToday349.8 MB00unknownToday349.8 MB00unknownToday362.6 MB00unknownToday349.8 MB00unknownToday349.8 MB00unknownToday357.5 MB00unknownToday362.1 MB00unknownToday356.9 MB00unknown. Torrents desperate housewives saison 5 episode 1.

Wang, D.C., Ping, LA. and Yang, H., 1995. Measurement of the mass attenuation coefficients for SiH4 and Si. Nucl Instrum Meth B; 95, pp.161-165.

Singh, K., Singh, H. and Sharma, V et al., 2002. Gamma-ray attenuation coefficients in bismuth borate glasses. Nucl Instrum Meth B; 194, pp.1-6.

Gerward, L., Guilbert, N. and Jensen, KB et al., 2004. WinXCom–a program for calculating X-ray attenuation coefficients. Radiat Phys Chem, 71, pp.653-654.

Baltej, S.S. Dhaliwal, A.S. Mann, K.S. and Kahlon, K.S., 2012, Study of mass attenuation coefficients, effective atomic numbers and electron densities for some low Z compounds of dosimetry interest at 59.54 keV incident photon energy. Annals of Nuclear Energy, (42), pp.153–157.

Nil, K., Zeynal, T. and Merve, C., 2013. Determining photon energy absorption parameters for different soil Samples. Journal of Radiation Research, 54, pp.578–586.

Singh, G. K. Lark, B. S. and Sahota, H.S., 2000. Attenuation Measurements in Solutions of Some Carbohydrates‖. Nuclear Science and Engineering, 134 (2), pp.208-217.

Hubbell, J.H and Seltzer, S.M., 1995. Tables of X-Ray Mass Attenuation coefficients and Mass Energy Absorption Coefficients, 1 keV to 20 MeV for Elements Z=1 to 92 and 48 Additional Substances of Dosimetric Interest. Radiation Physics Division, PML, NIST.

The National Institute of Standards and Technology (NIST) is an agency of the U.S. Department of Commerce 1996. Available at: http://www.nist.gov/pml/data/xraycoef/index.cfm.

Riyadh, Ch. Abul-Hail, 2011. Electrical conductivity dosimetric characteristics of gamma-irradiated food salt. Journal of Basrah Researches (Sciences), 37(4) A, pp.25-29.

View Counter: Abstract 998 and PDF 362

Article Metrics

Refbacks

• There are currently no refbacks.